while creating a general package with out any extra tool kit service guard manager shows unable to create package error.It's in redhat linux 6.5
↧
service guard manager error,unable to create package pkg_name,need help
↧
package not getting up in node
I am using two node ans hp servigurd is running on it
yeaterday i restarted my server after My package is not getting up please help
CLUSTER STATUS
dbcluster up
NODE STATUS STATE
dbnode01 up running
dbnode02 up running
UNOWNED_PACKAGES
PACKAGE STATUS STATE AUTO_RUN NODE
dbpkg down halted disabled unowned
[root@dbnode02 ~]#
Earliear i removed the mounted partion from my node, yeaterday i restarted my server after package is not getting UP pls help.
P.S. This thread has been moved from HP-UX > Serviceguard to Linux > Serviceguard. - Hp Forum Moderator
↧
↧
NFS package not starting - SGLX 12.00.50
Hi everyone,
I try to start my nfs package but its failing.
In the log of the package I finde the following:
service.sh[2879]: Starting service nfs_service using "/opt/cmcluster/conf/scripts/tkit/nfs/tkit_module.sh nfs_monitor"
master_control_script.sh[2267]: ###### Package start completed for nfs ######
nfs.mon[2900]: Node "me2": Starting NFS monitoring process
master_control_script.sh[3122]: ###### Halting package nfs ######
service.sh[3151]: Halting service nfs_service
cmhaltserv: Service name nfs_service is not running.
So it seems the monitoring service is failing imediately which brings down the package.
I tried to set the restart count of the monitoring service to like 5, but that didn't help.
The only way I can start the package is to comment out the monitoring service completly in the package conf.
Any help on that?
↧
unable to enable Serviceguard Manager on HPE System Managment Homepage on RHEL 7
Hi,
I have configured Serviceguard cluster with Oracle 12c on Prolient BL460c G7. And I have installed Serviceguard Manager It working fine and also installed HPE system Management Homepage (HPE SMH) it is also working fine. But I was unable to enable service guard manager with HPE SMH.
HPE SMH version 7.6.0
RHEL 7.3
Service Guard & Service Guard Manager version A.12.00.30
Can someone help me on this?
Which package i want to install to enable serviceguard manager on HPE SMH for RHEL 7?
↧
Quorum server configuration
Could you please help anyone, how to configure quorum server in redhat 6.5 x86 server for HPSG cluster quorum.
↧
↧
SGLX_00529.tar from where to download
Can anyone please fuide me where I can find the Serviceguard patch for linux 12.00.50. The patch name is SGLX_00529.tar.
I have tried downloading it from Patch management page but whatever I search it says no patch found.
https://h20565.www2.hpe.com/portal/site/hpsc/patch/home/ I am trying from here to download.
Any help much appreciated.
Thanks,
Syed
↧
Files not reflecting on both node in multi_node package
Hi,
I am using RHEL7.2 with HPE SG 12.00.50. I have configured multinode package and th epackages are mounted on both the nodes.
Now if I create any file/dir on node it doesn't refelect on other nodes. file/dir of node1 shows only on node1, file/dir of node2 shows only on node2.
xfs file system is used for this package.
Appreciate any help.
Thanks,
↧
HPE servieguard multi_node package not in sync mode on both node
Hello,
I have installed HPE serviceguard with a multinode package. the package are running succesfully on both nodes and are mounted.
Now when I create any files on either of the node it's not reflecting on other node, basically it's not syncing I belive.
OS=RHEL7.2
SG Version = 12.00.50
vgcreated in shared mode and mentioned as "vgchange -as" in package configuration file.
filesystem used is xfs
Any help how to fix this
Thanks,
↧
Extension of file system from clustered VG in service guard in Suse Linux Platform
Hi All
We have an activity where we need to extend a filesystem of a VG which is under the service guard control on SUSE Linux platform.This required to be an offline activity because the Suse Version is an old one. We are not getting the downtime approval for the entire package where other VGs also reside. So we are just planning to extend that particular file system by following the below plan of action.
1. Stop application related to that file system.
2. Unmount the file system manually
3. Extend the file system.
4. Mount the file system manually.
Please suggest do we need to take any further action for the same as it is under service guard or the above plan of action may cause any unplanned outage to the entire package.
Your valuable suggestion will be highly appreciated.
regards
Arup
↧
↧
alerting out of Service Guard on SLES
Hello all,
I have a customer that wants to get notified when his Service Guard cluster does a failover for his SAP HANA packages in a dual purpose scenario.
I read in the Managing SG document 12.00.51 in chapter „6.6 Alert Notification for Serviceguard Environment” that this is limited to Oracle, NFS and XDC.
In another chapter I read about check for Cluster status with a cron job.
Does SG has an alerting mechanism beyond this I can suggest to the customer?
Kind Regards,
Andreas Rathgeber
↧
HPSG logical volume configuration
Hi ALL,
I am using HPSG cluster on Redhat 6.5 x86. I have put all lvm disk information on cmcluster configuration file which resides from one volume group ( vg1)
I want to create another two logical volmue from that volume group (vg1) and want to use localy, that means want to mount localy like /sapmnt/PX3 differenet mount point whcih is not mentoned in cluster configuration.
Is it possible to use that local file system , is there any discripency? Please sugget me.
Gourv
↧
After SGLX install and LVM.conf settings, RHEL never booted.
I'm beginner of serviceguard on linux and I got LVM error while creationg cluster.
Could you give me some advice on what I should do with this isssue?
problem
After SGLX install and LVM.conf settings, RHEL never booted.
OS showed only / and swap partitions, failed e2fsck on the other OS internal partition(/var, /home...). I did e2fsck to the other partitions, but failed.
I could not find /var or /home device mapper file in /dev/mapper.
↧
ServiceGuard SNMP package fails during installation
Running two SLES 11.4 servers on VMWare. Trying to install Service Guard 12.10.00 using cmeasyinstall script. The script reports a failure during serviceguard-snmp-A.12.10.00-0.sles11.x86_64.rpm package installation:
3) serviceguard-snmp installation started:
ERROR: Installation of
/tmp/isomnt/SLES/SLES11/Serviceguard/x86_64/serviceguard-snmp-A.12.10.00-0.sles11.x86_64.rpm
failed with:
warning: /tmp/isomnt/SLES/SLES11/Serviceguard/x86_64/serviceguard-snmp-A.12.10.00-0.sles11.x86_64.rpm: Header V3 RSA/SHA256 signature: NOKEY, key ID
Preparing... ##################################################
serviceguard-snmp ##################################################
Verifying snmpd.conf contains"master agentx"
Verifying snmp.conf contains reference to the new mibs
Please take steps to make sure snmpd will start on reboot.
Shutting down snmpd:..done
Starting snmpd..done
Configuring cmsnmpd for autostart.
insserv: script cmcluster.init: service cmcluster already provided!
Starting cmsnmpdTimeout: No Response from 127.0.0.1.
Timeout: No Response from 127.0.0.1.
Timeout: No Response from 127.0.0.1.
Timeout: No Response from 127.0.0.1.
Failed as snmp has not started completelyerror: %posttrans(serviceguard-snmp-A.12.10.00-0.sles11.x86_64) scriptlet failed, exit status 1
ERROR: Installation failed for
/tmp/isomnt/SLES/SLES11/Serviceguard/x86_64/serviceguard-snmp-A.12.10.00-0.sles11.x86_64.rpm
However, the package components appear to have been installed.
Has anybody come across this issue before?
Thanks
↧
↧
ServiceGuard Manager Installation 12.30 // Keystore Problem
Hi there,
I just tried to get ServiceGuard Manager up and running, but I realized after the installation that the certificate that is delivered is not working. When I curl to the address I get "curl: (35) unknown SSL protocol error..."
Assuming the certificate is invalid I tried to regenerate the keystore according to the installation troubleshooting section at the very end of the Release Notes documentation, and once I did Jetty wasn't able to restart.
I simply generated the key with keytool (eclipse.org documentation) since I am fine when SSL is bringing up the certificate as not signed and then added the new password obfuscated and clear text to the jetty.xml and jetty-ssl.xml. Neither way worked. Any suggestions?
↧
Upgrade ServiceGuard license after adding new CPU
Hello Experts,
I am in situation where I have to add new processor in DL server running Serviceguard cluster and I have to add license after adding new processor.
I am looking for help to understand the procedure to upgrade license key. Action which I am going to follow is :
Ensure that $SGCONF/AutoPass/LicFile.txt exists.
Take the backup of existing file
Obtain new license key , keep into new file /tmp/newSGlicense
Use cmsetlicense –i to upgrade license.
Ensure correct license updated using cmgetlicense -f line
Any one please confirm if it’s the correct procedure or another procedure I have to follow for upgrade?
Thanks
↧
How to integrate Oracle OEM Agent start and stop through serviceguard (DB Cluster Package)
Dear Expert,
We are configuring Oracle DB cluster package through Servicegurad cluster. Now the customer is also asking us to integrate Oracle OEM Agent (emctl start agent & emctl stop agent) in the same DB package. We are not able to find any specific agent/module for this in Servicguard.
For Veritas cluster plugin is already available Deploying the Veritas Cluster Server Plug-in for Oracle Enterprise Manager.
Any help would be greatly appreciated.
OS Version: RHEL 7.4
Servicegurad Version: 12:.30
Thanks
AB
↧
How to configure standby heartbeat network on hp ux serviceguard
In my enviroment i have two node hp ux-v3 serviceguard, for heartbeat network we have configure single NIC from both node, i want to confgiure another physical NIC for standby heartbeat network.
Note: link aggregation is not possible due to 10G nic, confirm by HPE back line team.
↧
↧
service guard migration from rhel6 to rhel7
Hi All,
We are migrating hardware now. the service guard is running on old hardware. now how to migrate serviveguard from old to new hardware. the serviceguard version is " A.11.20.10". the old servers running on os RHEL6.3. now we are moving to RHEL 7.6. can you please help me with this.
Thank you in advance.
Thank you.
↧
Problem installing ServiceGuard for Linux on SLES 15 SP1
Just for information. I encountered an issue trying to install ServiceGuard B.12.50.00 (SGeSAP) on 2 VM nodes running SLES 15 SP1. A third VM, also running SLES 15 SP1 as a quorum server.
The ISO image for the SG software was mounted on the primary node and as far as I knew all pre-requisites are in place.
We run the “cminstaller -n node1 -n node2” to install SG. However, when I examine the /var/log/messages file we see the following:
2020-04-07T17:14:54.621188+01:00 node1 systemd[1]: hacl-cfgudp.service: Main process exited, code=exited, status=1/FAILURE
2020-04-07T17:14:54.621332+01:00 node1 systemd[1]: hacl-cfgudp.service: Unit entered failed state.
2020-04-07T17:14:54.621462+01:00 node1 systemd[1]: hacl-cfgudp.service: Failed with result 'exit-code'.
2020-04-07T17:14:54.639370+01:00 node1 systemd[1]: hacl-cfgudp.service: Main process exited, code=exited, status=1/FAILURE
2020-04-07T17:14:54.639667+01:00 node1 systemd[1]: hacl-cfgudp.service: Unit entered failed state.
2020-04-07T17:14:54.639849+01:00 node1 systemd[1]: hacl-cfgudp.service: Failed with result 'exit-code'
(...)
It turned out that the customer has enabled "secure boot" which prevents changes to the kernel and results in errors as seen above. Checking the documentation we find that it is a pre-requisit which was not checked prior to the installation.
The easy way to check is with the mokutil command:
# mokutil -–sb-state
SecureBoot disabled
#
Disabling secure boot results in ServiceGuard being installed correctly.
↧
How could I use this instruction? (serviceguard)
Hello.
Is a subscribe availiable for this instruction?
https://downloads.linux.hpe.com/SDR/project/sglx/sglx-enterprise/index.html
If Yes, so could I get a free token and with my email get packages?
If No, how could I use this instruction?
Thank you.
↧